Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

移动刚体激励下弹性梁的振动及其主动控制研究

本文研究了移动刚体激励下弹性梁的振动响应，以简支一弹怀支承梁为例进行了分析计算和实验研究。进而又提出了对弹性梁振动的最优控制方案，并进行了相应的仿真计算和实验研究。所有的实验结果同分析计算结果完全一致。     

基于特征模型的挠性悬臂板控制

针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性     

平板缝隙溅击喷嘴冷流混合特性

作为变推力液体火箭发动机上环形缝隙式喷嘴基本特性研究的一部分,本文研究了溅板的加入,以及溅板几何尺寸的改变对喷雾场冷流混合特性的影响。结果表明,溅板的加入改善了流强与混合比分布。溅击角的增大和合成膜在溅板上撞击线的内移不同程度地提高了E_m值。合理的设计和准确控制喷注参数可以获得满意的流强与混合比分布。     

直接力与气动力复合控制系统姿态稳定问题研究

大气层内直接力与气动力复合控制导弹具有响应快速、可用过载大等优点，可以拦截高速、高机动性目标。研究制导末端轨控直接力与气动力复合系统姿态稳定问题。首先分析了复合系统的特点和控制问题，建立了控制模型。然后应用扩张状态观测器观测对象模型内扰和外扰的实时作用量，进行反馈补偿，实现了动态线性化。最后设计了非平滑反馈控制律，从而实现了复合系统的姿态控制设计。仿真结果表明，系统具有良好的动态性能和稳态性能，控制器具有很强的鲁棒性。     

SPACE LIFE SCIENCE IN 2000-2001

Chinese scientists studied some of the problems in the field of space life science and achieved success in the area during 2000-2001. Space biological experi ments were carried out in the orbit and the results of ground studies on protein crystallization, space radiation, space motion sickness were introduced in this paper. The influences of simulated weightlessness on the brain-function, the car diovascular, endocrine hormones, immunity, skeletal and muscle systems were presented. In addition, gravity medicine and space environment medicine, as well as countermeasures to space deconditioning, such as the traditional Chinese medicine, were also reported.     

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。